14
for 10 seconds and then disappear.
•
By default, the access code is set as blank, therefore the OSD doesn
’
t display the access code. If you
want to set access code, please refer to
section for more information.
8.
Web UI
The Web UI provides basic controls and advanced settings. It can be accessed through a modern
browser, e.g. Chrome, Safari, Firefox, IE10+, etc.
By default, the switcher comes with a default IP address
192.168.1.8
. Subnet mask is
255.255.255.0
.
To get access to Web UI:
1. Connect your PC and the LAN port of the switcher to a local area network.
2. Set your PC to the same network segment as the switcher, e.g. 192.168.1.xxx.
3. Input the switcher
’
s IP address in the browser and press Enter and the following window will pop up.
4. Choose the language you wish to use: English or Chinese.
5. Input password (default password: admin) and click Login to enter the main page of Web UI.
The Web UI main page consists of General and Video Source Tabs.