infobit iMatrix H44A, User Manual, Page: 9 / 25

INFOBIT AV www.infobitav.com info@infobitav.com
Select the last or next the desired input source to Output 1 port
output, the corresponding green LED on the front panelilluminates.
7. Using the Bulit-In Web GUI Interface
The Switcher has a built-in Web interface to provide a means of controlling
or configuring various settings. There are six pages available, each of
which will be outlined in detail in the following sections:
The six pages are:
1. Status
–
Display information about the firmware and IP setting.
2. Video
–
Switch the desired input source to output and set the preset.
3. Input
–
Display information about the input signal and EDID setting.
4. Output
–
Display information about the output signal and scaler option.
5. Network
–
Allow basic network setting management and login options.
6. System
–
Panel lock, beep, serial baudrate setting and firmware update.
Note these six pages are only accessible in Admin mode, when User mode
is used only the Status and Video pages are available.
To access the Web interface, enter the IP address of the switcher into the
address bar of any web brower. The default IP address is 192.168.1.100.