INFOBIT AV
www.infobitav.com
Please see the following operation method.
Note that if the IP address of the switcher is not know, use the RS-232
command given in the Network Setting section
“
r ip addr!
”
to discover the
current IP address or set the switcher to factory default status and IP address
restores to default 192.168.1.100.
Step 1:
The TCP/IP port on the rear panel is directly connected a PC with an
UTP cable.
Step 2:
Set your PC IP address to the same network segment with Switcher,
for instance set PC IP address to 192.168.1.200 and Subnet mask to
255.255.255.0.
Step 3:
Enter the Switcher
’
s IP address into your brower on the PC to enter