INFOBIT AV
www.infobitav.com
Important:
1. All messages sent to the Switcher must be terminated with an exclamation mark
(!). Any carriage return that is present after the end of the command will be
ignored.
2. All spaces shown in the commands are required.
3. All response messages are terminated by a CR/LF sequence.
4. When all four inputs are requested by the same command, the response
will report each input on a separate line.
5. When four outputs are requested by the same command, the response
will report each output on a separate line.
The ASCII list about the product is shown as below.
ASCII Command
Serial port protocal: Baud rate
：
115200 (default), Data bits: 8bit, Stop bits:1, Check bit: None