InfiRay Outdoor
•
AFFO Series
•
Operating Manual www.infirayoutdoor.com
7
Charging
The AFFO series is supplied with a built-in rechargeable Li-ion battery pack,
which allows operation up to 9.5 hours.
When using the device for the
first time, please fully charge it first.
⚫
Open the USB rubber cap
(10)
on the bottom of the device.
⚫
Connect the Type C plug of the data cable to the Type C port
(12)
on the
device.
⚫
Connect anther port of the data cable to the power adapter.
⚫
Insert the plug of the adapter to the 110-240V socket.
⚫
When the device is charging, the power indicator
(11)
next to the Type
C port
(12)
is red. The power indicator
(11)
is on only in the charging
status. When the power indicator
(11)
turns green, the device is fully
charged. When the power indicator
(11)
blinks alternately red and green,
it indicates that the battery is not charged or the temperature is too high
or too low.
⚫
When charging, a lighting icon
will appear inside the battery icon
on the display. The lighting icon will not disappear until the data cable is
removed or the power is cut off.
⚫
Charging is finished when the interior of the battery icon on the display
is completely green
.
⚫
During using, when the battery icon turns red
, this means the
power level is low, please charge the device in time to avoid the data
loss.
Safety instructions for battery
⚫
The rated voltage of the product is 5V. Please charge the device
promptly when the battery is low so that the service life of the thermal
imaging monocular will not reduce due to battery over-discharge.
⚫
Don’t charge the device instantly while bring the battery from cold
environment to warm environment. Charging after 30-40 mins.
⚫
Charge the device at a temperature from 0°
C
to +40°
C
, otherwise the
battery life will be reduced significantly.
⚫
Never use a damaged or modified charger.
⚫
Don’t leave battery unattended when charging. Don’t leave the device
with a charger connected to the mains longer than over 24 hours after
full charge.
⚫
Do not expose the battery to high temperature or to a naked flame.
⚫
Don’t connect external device with a current consumption that exceed
permitted levels.
