InfiRay Outdoor
•
AFFO Series
•
Operating Manual www.infirayoutdoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
Video Recording
⚫
On the home screen, press and hold the
Down (3)
button to start the
video recording function.
⚫
Then, the recording timer in
the format of the HH: MM:
SS (hour: minute: second)
will appear on the upper right
of the display.
⚫
During recording, it is
supported to take a photo with a short press of the
Down (3)
button. Of
course, the other operations to the device are supported during
recording.
⚫
Press and hold the
Down (3)
button again to stop and save the video
recording.
⚫
All videos and photos will be saved in the build-in storage.
Memory Access
When the device is turned on and connected to a computer, it is
recognized by the computer as a flash memory card, which is used to
access the device's memory and make copies of pictures and videos.
⚫
Connect the device to a computer through the Type C data cable.
⚫
Power on the device for operation, and the USB function box pops up
on the screen.
-
Only for charging
: If you select this option, you can power the
device through the
computer and charge
the built-in battery pack
at the same time.
-
Data reading:
Select
this option, you can view
the recorded videos and
photos on the computer and charge the built-in battery pack at the
same time.
-
USB debugging:
Select this option, you can update the device
program through the host computer and charge the built-in battery
pack at the same time.
⚫
Select the Data reading option by the
Up (5) / Down (3)
button, and
confirm the selection with a short press of the
M (4)
button.
⚫
Double click “my computer” on the computer desktop - select the USB
flash disk and double click to access the memory space.
