manualshive.com logo in svg

Infinova V6822-T0 Series, User Manual, Page: 2 / 63

Share
Download
Infinova V6822-T0 Series User Manual Download Page 2

 

Notice 

 

Copyright Statement

 

This manual may not be reproduced in any form or by any means to create any 
derivative such as translation, transformation, or adaptation without the prior 
written permission of Infinova. 
Infinova reserves the right to change this manual and the specifications without 
prior notice. The most recent product specifications and user documentation for 
all Infinova products are available on our web site www.infinova.com. 

 

Trademarks

 

Infinova

® 

is a trademark of Infinova. 

 
All other trademarks that may appear belong to their respective proprietors. 

 

FCC Warning

 

The 

V6822-T0

 series HD megapixel low light IP minidome cameras comply 

with the FCC rules. 
 
Operation is subject to the following two conditions: 

 

This device will not cause harmful interference. 

 

This device must accept any interference received, including interference 
that may cause undesired operations. 

 
The 

V6822-T0

 series HD megapixel low light IP minidome cameras have been 

tested and found to comply with the limits for a Class A digital device, pursuant 
to the FCC rules. With these rules and regulations being obeyed to maintain the 
good working condition of device, the operation is not supposed to be affected 
by the external interruptions under certain circumstances. This device is 
electromagnetic, so all the installation and application processing along the 
device has to follow strictly to the manual, or it may hamper the 
telecommunication around. Meanwhile, there is no guarantee that interference 
will not occur in a certain particular installation situation. 

Summary of Contents for V6822-T0 Series
































































Reviews:

No comments