9
3-axis adjustment. It allows 0°~340° panning adjustment, 0°~80° tilting
adjustment and 0°~340° rotating adjustment.
Figure 2-5
Step 4: Install dome bubble
Install the bubble flange to upper housing. Align the screw holes of the two
parts. Rotate the bubble to make the gap of the shielding cover align with the
lens. Then pre-tighten the three M4 screws. Rotate the bubble slightly to make
the lens lie in the middle of the gap (See Figure 2-7). Then, fasten the three M4
screws.
With all the procedures finished, user should further confirm whether each part
of the device is properly and firmly connected.
Figure 2-6