10
CHAPTER III IE BROWSER SETTINGS
When view the video, the user need to adjust the IE browser of the monitor or
other video devices, and set proper system function based on the following
instructions:
Support IE browser version: Internet Explorer 6.0 or above;
Must install
InfiPlayerAX
control and equip with Directx 9.0c.
3.1 Equipment Connection
V6202-T00&V6202-T02 series IP camera can be directly connected to a
computer, or connected to a network.
Note:
Check whether the connection is tight or not before power-on.
3.2 Software Installation
The installation procedures of V6202-T00&V6202-T02 series camera image
software are listed as follows:
(1) Login
First, start IE browser and enter IP address. Enter user name and password in
the pop-up login interface.
The default IP address is http://192.168.1.100; the default subnet mask is
255.255.255.0 and the default gateway IP address is 192.168.1.254. For normal
access, correctly set local IP parameters before system login.
Do log in the system with the default super user for the first time to run the
software. The default Super User is admin (password: admin).
(2) Install and run Control
There are two ways to install control.
Method 1:
The prompt message as below will come out in live view window after a
successful login. Click the link to run, or store the exe file, then run it.
