INFINITY3DP INFINITY X2, User Manual, Page: 38 / 39

DAILY MAINTAIN
Wipe the enclosure of X2 with dry towel.
DO NOT clean the panel with alcohol.
Remove dust or plastic particle on fan blades by tweezers.
PRINT ISSUES
3D Printer Stringing
1. Reduce the print speed.
2. Increase the travel speed.
3. Modify the retraction speed and distance.
Nozzle Jam
1. Heat up the nozzle until the filament melted with its target temperature.
2. Press the clip on the hotend module till the Release Button up as to loosen the filament.
3. Push gently with the filament until all the residue comes out of the nozzle.
4. Make sure the nozzle is clean and free of clogs.
Under Extrusion
Adjust the distance between the nozzle and build plate (Z-axis) with proper height as to ensure well adhesive of material.
MAINTENANCE _ TROUBLESHOOTING
35