INFINITY3DP INFINITY X2, User Manual, Page: 11 / 39

Step 1: Select Build Plate Leveling icon,
the build plate will automatically level to a designated height.
Step 2: Select one corner of the nine-square grids,
hotend module would move to the designated position.
Step 3: Put a piece of standard paper (thickness of 100gsm) between
the nozzle and the build plate after platform leveled.
Step 4: Rotate the bottom knurled nut to roughly adjust the distance between
the nozzle and the build plate until tighten the paper.
Step 5: Repeat for all four corners with above procedures for completing the
build plate leveling adjustment.
BUILDPLATELEVELING
08
OK Cancel
Remind
Are you sure to adjust?
※ Please DO NOT randomly click the icons.
The reaction and operating procedure would be more complex,
please contact INFINITY3DP for further instruction if necessary.
※ Rotate the knurled nut in counterclockwise would
increase the distance between the nozzle and the build plate.
※ Rotate the knurled nut in clockwise would
decrease the distance between the nozzle and the build plate.