background image

23 

LEXOR LIMITED FACTORY WARRANTY 

LIMITED COVERAGE:

  

All parts are solely repaired or replaced, at Lexor’s option, any evaluated defects in workmanship, 

except

 the strictly excluded conditions 

below. Labor, shipping and return shipping are 

not

 included.  Lexor reserves the rights to send out new or equivalent to new as replacements. 

Lexor shall have no obligation to repair, replace, or refund until the verification process by Lexor is completed. 

Lexor’s limited warranty applies only to Lexor Pedicure Spas utilized in the United States. 

This limited warranty is 

not

 transferrable. Furthermore, this limited warranty is void if removed from its place of initial shipment. 

*Spa Tub: Shipping or return shipping cost of spa tub is not included in the limited warranty.
*Pedicure Stool, Manicure Stool and Customer Chair

: 1-Yr warranty on adjustable hydraulic and wheels from the date of shipment.

No warranty on Upholstery and any other parts not listed.

 

TERRA BELLA FURNITURE WARRANTY:

  

Claims of damages or any missing parts must be made within 48 hrs (business day) after receiving the furniture by calling our Customer Care 
and opening a case.  Image(s) of the damage(s) and a signed Bill of Lading must be submitted. 

 

Lexor will not cover any missing part or 

damage claims after 48 hrs.

WHAT IS NOT COVERED:  

Mishandling, damages from shipping, expenses from returning eligible defectives to factory, improper installation, abuse, misuse, neglect, 
accidental events, freight damages, damage resulting from a person standing in the Pedicure Spa’s basin or other similar stress to that basin, 
normal wear and tear on upholstery, or natural disaster.  

REQUEST FOR SERVICE:  

Prior to calling, please have your Salon or company name, address, telephone number, contact name, model name, and serial number, and a brief description 
of the problem. Contact Lexor’s Customer Care Department to report defects or if you have questions on warranty prior to the expiration date of warranty at: 

 

www.

uspedicurespa

.com

 

LENGTH OF WARRANTY: 

*Twelve (12) months starting from the date of shipment. Purchase invoice, bill of sale, date of purchase, or delivery receipt are required by
Lexor to qualify for your warranty coverage. 

UNAUTHORIZED REPAIR:  

Any performed or attempted repair or modification on the spa without explicit authorization in writing from Lexor will void this limited warranty. 

DISTRIBUTOR WARRANTIES:  

There is 

no

 distributor, dealer, general contractor, or other party has any legal rights to apprentice Lexor to any obligations or charges to this 

warranty in any extent. 

LIMITED DAMAGES:   

Allowed by law, Lexor will fully extend its options to disclaim and refuse any liability for substantial damages including, but not limited to, loss 
of business reputation, decrease in profits, or any fastidious damages other than these limited damages. In some states, the mentioned 
damages are not allowed to lawfully sustain; therefore, they may 

not 

apply to you.  

*Extended 1-Yr Warranty: (optional as an upgrade – to be purchased prior to the shipment date of the original order)

Extended 1-Yr Warranty will cover the above mentioned including Tru-Touch Massage™ System. 

*Warranty - Parts Sale:

All parts purchased from Lexor Customer Care will have a 90-Day warranty from shipped date, except Complete Chair Top with Massage 
System and Complete Spa Base with Plumbing. Lexor reserves the rights to send out new or equivalent to new as replacements.  All part 
sales are final and no refunds will be accepted. 

*Complete Chair Top with Massage System will have a 6-Month Limited Warranty from the date of shipment.
*Complete Spa Base with Plumbing Installed will have a 6-Month Limited Warranty from the date of shipment.

*Continuing a policy of constant research and development to improve the quality of our products, Lexor, Inc. reserves the right to change pricing, parts,

design and specifications without prior notice or obligation. 

Version: 1.3 

06/13/2012 

Your Initials: 

Summary of Contents for Pedicure Spa

























Reviews: