background image

 

  

 

 

25 

   

 

Ordercode: 41526 

Infinity iW-740 RDM 

6. Information Menu 
With this menu you can see several device settings. 

01)

 

Press the 

 button and select 

02)

 

Press the 

 button, to confirm. 

 

 

 
03)

 

You can view 10 parameters. 

 
 

DMX Channels 

 
21 Channels 
 
Channel 1 – Horizontal movement (Pan) 
Move the slider up, in order to move head horizontally (PAN). 
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).  
The head can be turned by 540° and stopped at any position you wish.

 

 
Channel 2 – Vertical movement (Tilt) 
Move the slider up, in order to move head vertically (TILT). 
Gradual head adjustment from one end of the slider to the other (0-255, 128-center). 
The head can be turned by 270° and stopped at any position you wish. 
 
Channel 3 – Pan fine 16 bit 
 
Channel 4 – Tilt fine 16 bit 
 
Channel 5 – Pan / Tilt speed 

0-255 

From Max Speed (0) to Min. Speed (255) 

 
Channel 6 – Dimmer  

0-255 

Dimmer intensity, from dark to brightest 

 

Channel 7 – Shutter / Strobe (CH6 and CH8, CH9, CH10, CH11 or CH13 must be set between 1-255 

 ) 

0-4 

Shutter closed 

5-9 

Shutter open 

10-50 

Strobe effect 1, from fast to slow 

51-54 

Shutter open 

55-95 

Strobe effect 2 (fast on and slow off), from fast to slow 

96-99 

Shutter open 

100-140 

Strobe effect 3 (slow on and fast off), from fast to slow 

Summary of Contents for iW-740 RDM

















































Reviews: