•
This appliance is not intended to be used by who have physical, sensory and mental problems,
also including children and those who are lack of experience and common sence in operating this
appliance, unless they are under enough instruction of their keepers.
•
Take good care of children to make sure they are not playing with the appliance.
•
Heating equipment is not allowed to place under a socket.
•
Because the heater is not equip with the device that control the temperature of a room, people
who are incapabal of controlling their own behavior is not allowed to use this heater unless they
are given sustain supervision.
•
When the skin of power cord is damaged, it should be replaced by professional persons from man
ufacturer, their repair shops or other related sections.
•
The heater must not be loacated immediately below a socket-outlet
•
In order to avoid overheating, do not cover the heater.
•
To avoid overheating, cover the heater ban
Disclaimer: heater may not be directly below the socket
ASSEMBLING
•
https://we.tl/fXlEGlXKB9Do not operate the oil heater without the base
support fixed correctly.
•
To fix the rear support base, fit it tightly against the fin, until it stays in
place (as.).
•
To fix the front support base, fit it tightly against the bottom on the front
panel (as.).
•
After fixing the supports, confirm that the heater is stable on the floor.
USING THE APPLIANCE
•
Set the thermostat to the minimal position and power switch to t
he “Выкл.” position, insert the
plug to the power supply.
THERMOSTAT
•
The thermostat will automatically maintain your desired room temperature.
•
Set
the power switch to the “Вкл.” position.
•
Turn the thermostat control clockwise all the way round until you hear a click, this sound
indicates that the oil heater is activated, the pilot light is ON. Continue turning the thermostat
control clockwise to its highest setting.
•
When the pilot light is ON, the heater is activated. This light turns ON and OFF repeatedly by order
of the thermostat.
•
Turning the thermostat clockwise will always increase the set temperature; turning it
anticlockwise will decrease the set temperature. The thermostat will automatically turn the heater
on and off.
NOTE:
•
The room must be sealed in good condition, if not, it will not make good result because of the
influx of heat.
•
After use, turn the thermostat to the minimal position and set the power switch to the “Выкл.”
position and unplug from power supply.
MAINTENANCE AND CARE
•
The oil heater should be cleaned regularly to wipe out the dust on the surface of fins. As this may
result the radiating efficient.
