InfinitePlay PLEATS Z4000, Installer Manual

Page: 11 / 27

11
EN
Pleats
5-Hook the upper part of the handset support to the mounting plate.
6-Now hook the lower part of the handset holder.
7-Hook the handset on the handset support.
8-The video door entry system is ready for configuration.
To remove the handset holder, use a screwdriver to pry up the bottom of the handset holder.
To remove the video door entry system it is necessary to slide it upwards and then remove it from the support.
For the connection diagrams, refer to the CONNECTION DIAGRAMS section located in the contents.
CAUTION: The video door entry system must be located away from light and heat sources.
Installation
5
6
7
8