FINA250
用户手册
- 55 -
11.3.4 Adjustment of Bidirectional Printing
Firstly adjust all print heads in control panel. If printing effect of individual print head is not good in
printing, users can adjust individually in software.
Adjustment of bidirectional printing as below
:
1.
Open the
BID_test.group
in TRY
.
1.
Click
to print.
2.
Check the pattern; select the value of lines overlapping best.
3.
If some colors are aligned, some are not, please adjust the “BiDirection” in “More”.
NOTE:
Different printing speeds have different printing corrections.
11.4 Basic operation of RIP
Refer to
《
RIP Software manual
》
. Please close the printer driver software before opening RIP.
Note: Do not open TRY and RIP software synchronously, for avoiding the interference.
Summary of Contents for FINA250
