FINA250
用户手册
- 30 -
6.4
Printing Steps
On normal condition, the steps are as follows:
1. Power on printer.
2. Turn on computer.
Note
：
It is recommended to power on the printer first. Otherwise the connection may fail.
3. Install media, put down the press rob to press on media.
4. Clean the head and start the self-diagnosis till no nozzle clogging.
5. Press ONLINE to online the printer, then LCD will display ONLINE MODE.
Figure
：
Offline Mode
Figure
：
Online Mode
Figure 6-2 Offline/Online Mode
6. Trim the pattern for printing, and save it in computer.
7. Open INFINITI RIP.
8. Create new print file.
9. Load the pattern for printing.
10. Adjust the position, size, property, resolution of the pattern.
11. Printer setting
1) Select File/Printer setting. Below dialogue figure shows:
2) Select the type of printer.
3) Click the “Printer setting”. Set the relevant value in the following dialogue figure.
Figure 6-3 Printer Setting
a. Select the quantity of print head.
b. Select the printing precision.
c. Select the printing mode: bidirectional printing or single direction printing.
d. Press “color tune” to adjust color.
Note: Details of the functions above and others referred to the RIP Manual
Waiting…
Online
Menu
1. Ink Status
+
2. Heat Status
+
3. Cleaning Tool
+
Offline
4. Print para
+
Summary of Contents for FINA250
