Infinite Peripherals LINEA PRO 6 User Manual Download Page 16

USER MANUAL — LINEA PRO 6

16

Federal Communications Commission

Federal Communications Commission (FCC) Statement
 
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate 
the equipment.
 
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are 
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:
• 

Reorient or relocate the receiving antenna.

• 

 Increase the separation between the equipment and receiver.

• 

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• 

 Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:
1. 

This device may not cause interference and

2. 

This device must accept any interference, including interference that may cause undesired operation of the device.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating 
instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or 
transmitter.

Summary of Contents for LINEA PRO 6

















Reviews: