USER MANUAL — LINEA PRO 6
12
Contactless Card Reader (RFID)
The optional RFID tag/card reader incorporates several RFID formats depending on the model of your Linea Pro 6.
1.
To activate the unit, press the scan button.
2.
Place the RFID tag/card over the receiver/transmitter as
indicated by the RFID label.
Note:
Keep the face of the tag/card flat, with the receiver/transmitter as
close as possible. Depending on the type of RFID tags/cards being
used, it may be necessary for tags/cards to make direct contact
with the surface where the RFID receiver/transmitter is located for
proper reading and writing.
Magnetic Stripe Reader (MSR)
The built-in magnetic stripe reader incorporates a 3-track, bi-directional, encryption-capable read head. A single swipe reads data from all three tracks.
Note:
The MSR functions as an unencrypted MSR until an encryption key is injected into the MSR head by a designated Infinite Peripherals key injection facility.
Refer to
https://ipcmobile.com/support/technical-services#key-injection
for details.
1.
Press the scan button to activate the unit.
2.
Insert the card with the magnetic stripe face up into either end
of the MSR reader, and then swipe the card through toward the
other end of the reader.
Note:
To ensure the magnetic stripe pass over the read head evenly, keep
the edge of the card flat on the inner edge of the reader.