Infinea X DF User Manual
14
Cleaning Guidelines
•
Do NOT autoclave, machine wash, pressure-sterilize or gas-
sterilize the Infinea X DF.
•
Do NOT soak or immerse in any liquid.
•
Clean the Infinea X DF only when the battery module is properly
installed and locked into the Infinea X DF. This will ensure proper
sealing of the Infinea X DF prior to introducing any solutions
and/or wipes used during the cleaning process.
•
Apply cleaning solutions with a soft lint-free cloth. If the solution
comes in the form of a wipe, ensure the wipe is lint-free and will
not scratch the plastic surfaces (especially the scan window).
Excessive solution that resides in any of the waterproof
membrane or gasket areas can seep into the devices and cause
damage to the internal components.
•
Do not touch, press or rub the display and/or covers with
abrasive cleaning compounds, instruments, brushes, rough
surface material or bring the display and/or covers into contact
with products that could potentially scratch the display or
covers.
•
To clean the Infinea X DF screw areas, use a soft-bristled brush
with approved cleaning solutions. Focus cleaning in the screw
areas, ensuring that the brush is not used in areas that contain
seals or gaskets.
•
Do not use ammonia based, petroleum-based or acetone
cleaning solutions to clean the Infinea X DF. Also avoid harsh
solvents.
•
Use the following cleaning solutions only to clean the Infinea X
DF exterior surfaces:
*
Clorox® Bleach (10%)
*
Isopropyl Alcohol Wipes (70%)
Cleaning Precautions
The Infinea X DF is certified to meet IP54 Ingress Protection Marking
per IEC 60529. Per the IP54 rating, the Infinea X DF is protected against
interference with normal operation of the Infinea X DF sled caused by
dust and splashing liquids. At no time should the Infinea X DF sled be
completely immersed in liquid. Total submersion of the device may allow
liquid to enter the unit and impair its normal function. Immersion will
also void the Infinea X DF warranty.
The end user should determine an appropriate cleaning procedure
that complies with any facility and/or industry-specific cleaning
requirements. The following information is a general cleaning guideline
that should be followed to ensure the Infinea X DF maintains its normal
operation.