USER MANUAL- INFINEA TAB LITE
10
Magnetic Stripe Reader
(MSR)
The built-in magnetic stripe reader (MSR) has a three-track bi-
directional encryption-capable magnetic read head. A single swipe
reads information from all three tracks.
•
To read card cata, swipe a card with an even sliding motion.
•
The magnetic card must face in the same direction as the face of
the iOS device.
•
Keep the edge of the card flat on the inner back of the stripe
reader to ensure the magnetic stripe passes over the read head
evenly.
Read NFC Cards
The NFC receiver/transmitter is located on the back of the unit, below
the LEDs, and is denoted by the WiFi symbol.
1.
Tap the contactless card reader option in the iOS application.
2.
Place the NFC card/tag over the NFC label on the transmitter/
receiver, keeping the face of the card flat on the transmitter and
as close as possible.
3.
Remove the card/tag after the display indicates the transaction
is complete. The data is sent from the reader to the iOS device.
Note:
Depending on the type of NFC card/tag, it may be necessary
to make direct contact with the surface of the receiver/
transmitter for proper reading/writing.
Turn on the Infinea Tab Lite
1.
Press the On button on the side of the unit.
2.
Hold the button until you see the first three LEDs illuminated,
and then release the button.
