23
Select the channel and select the type of capture i.e., Normal, Motion or Alarm
The capture schedule can be set for the whole week and the schedule of the current channel
can be copied to any other channel or all channels to speed up the scheduling process.
Note:
1. In the Capture schedule menu, “No Color” stands for no recording;
2. “Green” stands for Normal capture
3. “Yellow” stands for Motion capture
4. “Red” stands for Alarm capture
5.2.1.13 Network
Go to “Main Menu”
“Parameter”
“Network”
“Network” to enter the interface shown as Picture 5-18.
In this menu, the users can change the network settings.
Picture 5-18
In DHCP mode, the router automatically assigns IP address for DVR. Whenever DVR or DHCP server is
restarted, IP address obtained by DVR may be different. As a result, users have to check IP address for
each remote access of DVR. So it is recommended to use Static mode. The operation procedure is as
follows:
1.
Select Static.
2.
Enter the IP address, Subnet mask, Gateway, DNS1 and DNS2.
3.
Input the Client Port and HTTP Port (the two values must not be the same).
4.
Click Save
After setting IP address of DVR, the ports have to be mapped in the router for accessing the DVR over
the internet.
Note:
If there are multiple DVRs in a LAN, make sure their MAC addresses are different (Refer to
System).
5.2.1.14 E-mail
Go to “Main Menu”
“Parameter”
“Network”
“Email” to enter into the E-mail menu.