Technical Reference Manual
002-29852 Rev. *B
Bits Name
SW
HW
Default or
Enum
Description
31
ACTIVATE
RW
RW1C
0
SW sets this field to '1' to activate (set to '1') a trigger
as identified by TR_SEL, TR_EDGE and OUT_SEL.
HW sets this field to '0' for edge sensitive triggers
AFTER the selected trigger is activated for two clk_peri
cycles.
Note: when ACTIVATE is '1', SW should not modify
the other register fields.
SW MUST NOT set ACTIVATE bit to '1' while updating
the other register bits simultaneously. At first the SW
MUST update the other register bits as needed, and
then set ACTIVATE to '1' with a new register write.
1142
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers