Infineon TLD5542-1IVREG-EVAL, User Manual, Page: 8 / 18

User Manual 8 of 18 Rev.1.00
2020-05-25
TLD5542-1IVREG-EVAL evaluation board
User Manual
Infineon μIO stick and Infineon Toolbox
4 Infineon μ IO stick and Infineon Toolbox
The Infineon μIO stick is an interface device for controlling Infineon boards/kits during run time
through PC.

Enables the connection between the evaluation board and USB for SPI programming and monitoring
by using the
Config Wizard software, which can be downloaded via the Infineon Toolbox .

Plugs into the evaluation board via a standard 16-pin connector and allows easy interface to the
microcontroller via USB for SPI, CAN, LIN communication etc.
Figure 12 μIO stick to the PC and the μIO flat cable to the evalboard
The Infineon Toolbox it is a
single platform interface which
allows for:

Quick installation of tools by name or QR code

Help with documentation

Viewing and starting installed tools from built-in launcher

Receiving update notifications
Figure 13 Infineon Toolbox
For details about Infineon toolbox and μIO stick check the Infineon website: Infineon Toolbox .