User Guide
3 of 46
Rev. 1.0
2022-03-09
48V Battery Switch Reference Design
R 48V BATT Switch10
Safety precautions
Safety precautions
Note:
Please note the following warnings regarding the hazards associated with development systems.
Table 1
Safety precautions
Caution:
The heatsink and the device surfaces of the evaluation or reference board
may become hot during testing. Hence, necessary precautions are required while
handling the board. Failure to comply may cause injury.
Caution:
Only qualified personnel familiar with the challenges of handling high
current circuits should plan, install, commission, and subsequently service the system.
Failure to comply may result in personal injury and/or equipment damage.
Caution:
The evaluation or reference board contains parts and assemblies sensitive to
electrostatic discharge (ESD). Electrostatic control precautions are required when
installing, testing, servicing, or repairing the assembly. Component damage may
result if ESD control procedures are not followed. If you are not familiar with
electrostatic control procedures, refer to the applicable ESD protection handbooks and
guidelines.
Caution:
The evaluation or reference board is shipped with packing materials that
need to be removed prior to installation. Failure to remove all packing materials that
are unnecessary for system installation may result in overheating or abnormal
operating conditions.
