User Guide
2 of 46
Rev. 1.0
2022-03-09
48V Battery Switch Reference Design
R 48V BATT Switch10
Important notice
Important notice
“Evaluation Boards and Reference Boards” shall mean products embedded on a printed circuit board (PCB) for
demonstration and/or evaluation purposes, which include, without limitation, demonstration, reference and
evaluation boards, kits, and design (collectively referred to as “Reference Board”).
Environmental conditions have been considered in the design of the Evaluation Boards and Reference Boards
provided by Infineon Technologies. The design of the Evaluation Boards and Reference Boards has been tested by
Infineon Technologies only as described in this document. The design is not qualified in terms of safety
requirements, manufacturing and operation over the entire operating temperature range or lifetime.
The Evaluation Boards and Reference Boards provided by Infineon Technologies are subject to functional testing
only under typical load conditions. Evaluation Boards and Reference Boards are not subject to the same procedures
as regular products regarding returned material analysis (RMA), process change notification (PCN) and product
discontinuation (PD).
Evaluation Boards and Reference Boards are not commercialized products, and are solely intended for evaluation
and testing purposes. In particular, they shall not be used for reliability testing or production. The Evaluation
Boards and Reference Boards may therefore not comply with CE or similar standards (including but not limited to
the EMC Directive 2004/EC/108 and the EMC Act) and may not fulfill other requirements of the country in which they
are operated by the customer. The customer shall ensure that all Evaluation Boards and Reference Boards will be
handled in a way which is compliant with the relevant requirements and standards of the country in which they are
operated.
The Evaluation Boards and Reference Boards as well as the information provided in this document are addressed
only to qualified and skilled technical staff, for laboratory usage, and shall be used and managed according to the
terms and conditions set forth in this document and in other related documentation supplied with the respective
Evaluation Board or Reference Board.
It is the responsibility of the customer’s technical departments to evaluate the suitability of the Evaluation Boards
and Reference Boards for the intended application, and to evaluate the completeness and correctness of the
information provided in this document with respect to such application.
The customer is obliged to ensure that the use of the Evaluation Boards and Reference Boards does not cause any
harm to persons or third-party property.
The Evaluation Boards and Reference Boards and any information in this document is provided "as is" and Infineon
Technologies disclaims any warranties, express or implied, including but not limited to warranties of non-
infringement of third-party rights and implied warranties of fitness for any purpose, or for merchantability.
Infineon Technologies shall not be responsible for any damages resulting from the use of the Evaluation Boards and
Reference Boards and/or from any information provided in this document. The customer is obliged to defend,
indemnify, and hold Infineon Technologies harmless from and against any claims or damages arising out of or
resulting from any use thereof.
Infineon Technologies reserves the right to modify this document and/or any information provided herein at any
time without further notice.
