Application Note
18
<Revision 2.4>
<<2019-06-17>>
Assembly Instructions for the Easy-PressFIT Modules
Figure 15
Module fastening options
Alternatively, one screw can be applied initially. It is important that the module does not lift up. To prevent this,
tighten the first screw loosely to avoid a press force to the clamp (Figure 16a). Then, tighten the second screw
completely (Figure 16b). Finally, tighten the first screw completely (Figure 16c).
Figure 16
Fasten the module by tightening both screws at the same time
