12
– Audio resampling
10
– Playback options
11
– Volume options
Software setup
›
Go to the settings menu on the top right corner and
select playback options.
Make sure the
“I2S DAC”
option is OFF
and in
“Playback options” select
“snd_rpi_merus_amp” as Output device. Press
save.
›
In Volume options select
“Software” as
Mixer
type
to
allow
the
protection
mechanisms of the HAT to work properly.
Press save.
›
In the Audio resampling section turn on the
audio resampling option. Select
“24” as target
bit depth,
“native” as target sample rate.
Press save.
Figure 13. Volumio settings menu: Playback options
Figure 14. Volumio settings menu: Volume options
Figure 15. Volumio settings menu: Audio resampling
8
December 2019
Copyright © Infineon Technologies AG 2019. All rights reserved.
