User Manual
9 of 47
Revision 1.4
2020-07-16
EVAL-M3-IM564 User Manual
iMOTION
™
Modular Application Design Kit
Main features of EVAL-M3-IM564
Parameters
Values
Conditions / comments
PFC OCP2
22 A
peak
Configured by either PFC current sensing
resistor RS3, or adapting comparator
threshold divider resistor R5/R7 or R4/R8
Inverter OCP1
1
20 A
peak
Configured by MCEWizard only, OPA output
Max. range peak value is 31 A
peak
(23.8 A
rms)
Inverter OCP2
22 A
peak
Configured by changing shunt resistor RS4 , or
adapting comparator threshold divider
resistor R30/R31 or R19/R29
Inverter OCP3
25 A
peak
Configured by changing shunt resistor RS4 , or
threshold divider resistor R40/R41, ITRIP
positive going threshold is about 525 mV
Temperature trip level
100 °C
For controller board EVAL-M3-102T
On board power supply
15 V
15 V ± 5 %, max. 1 A
Used for CIPOS
™
IPM gate driver & cooling fan
3.3 V
3.3 V ± 2 %, max. 20 mA
Supplying the 3.3 V to the controller board
and protection circuits
PCB characteristics
Material
FR4, 1.6 mm thickness, 2
layers.
35 µm copper thickness
Dimension
148 mm × 165 mm
System environment
Ambient temperature
25 °C
NA
1
For iMOTION
™
IC IMC1xx, there are three types of Gatekill input source (Refer to section 4.2.3, or control board user manual for
details). Please note that if you select comparator for Gatekill input source, the external Gatekill signal will be not used. And the
signal I_Shunt will be compared by the internal comparator with the “Gatekill Comparator Reference” value set in MCEWizard only.