User Manual
15 of 37
Revision 1.0
2018-08-23
EVAL-M1-CTF620N3 User Manual
iMOTION
™
Modular Application Design Kit
Getting Started with EVAL-M1-CTF620N3
4.2.2
MCEDesigner setup overview
After installing MCEDesigner installer, there is a shortcut for MCEDesigner on Windows desktop. Double click
the shortcut to open MCEDesigner and then open “IMC101T_xx.irc” file as shown in Table 7.
Figure 8
MCEDesigner’s Main Display for EVAL-M1-101T
To program system drive parameters into IMC101T-T038, please click “Tools” menu and select “Programmer”
in the pull down list. The pop-up window “Program IMC controller” will show up as in Figure 9. Click on the
“Program Parameters” radio button (this is the default option), and then select the Drive System Parameter file
created using MCEWizard by clicking on “Browse”. Finally, click on the “Start” button to program the parameter
file into the IMC101T-T038 IC.
Figure 9
“Program IMC Controller” pop-up window