User Manual
4
Revision 2.1
2018-07-09
EVAL-M1-05-65D User Manual
iMOTION
™
Modular Application Design Kit
Introduction
2
Introduction
The EVAL-M1-05-65D evaluation board is a part of the iMOTION
™
Modular Application Design Kit for drives
(iMOTION
™
MADK).
The MADK-platform is intended to use various power stages with different control boards. These boards can
easily be interfaced through the 20 pin iMOTION
™
MADK-M1 interface connector.
This evaluation board is designed to give comprehensible solutions of a power stage featuring µIPM
™
-DIP. The
board is equipped with all assembly groups for sensor less field oriented control (FOC). It provides a single-
phase AC-connector, rectifier, DC-link and 3-phase output for power. It contains emitter-shunts for current
sensing and a voltage divider for DC-link voltage measurement.
The EVAL-M1-05-65D evaluation board is available from Infineon. The features of this board are described in the
design feature chapter of this document, whereas the remaining paragraphs provide information to enable the
customers to copy, modify and qualify the design for production according to their own specific requirements.
Environmental conditions were considered in the design of the EVAL-M1-05-65D. The design was tested as
described in this document but not qualified regarding safety requirements or manufacturing and operation
over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to
functional testing only.
Evaluation boards are not subject to the same procedures as regular products regarding Returned Material
Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD). Evaluation boards are
intended to be used under laboratory conditions by specialists only.
Figure 1
Evaluation-board EVAL-M1-05-65D
Figure 1 shows the evaluation board EVAL-M1-05-65D. Although this board is compatible with on surface mount
as well as through whole CIPOS
™
Micro modules. This document explains the features and details of this board
in combination with CIPOS
™
Micro IRSM515-065 and IRSM505-065. The only difference between these modules
is the presence of a NTC. IRSM505-065 has a NTC and IRSM515-065 does not. Both modules are rated 500 V.
Ratings and other details of the board are explained in the subsequent sections.