User Manual
15
Revision 2.1
2018-07-09
EVAL-M1-05-65D User Manual
iMOTION
™
Modular Application Design Kit
Getting Started with EVAL-M1-05-65D
Table 8 provides the MCEWizard setup overview for hardware related parameters specific to EVAL-M1-05-65D
power board. Similar tables will be available in each control board’s Application Note. Combination of this
table and the corresponding table of the control board provides enough information to setup the MADK-based
motor drive system in shortest time.
Table 8
MCEWizard setup overview table
Page
Parameter
Value
Comment
Welcome Page Control Board selecting
EVAL-M1-101T for example
Welcome Page Power Board selecting
EVAL-M1-05-65D
If no, select similar
power board to modify
Options Page Motor 1 Shunt Configuration
Leg shunt
Question 3
Controller Supply Voltage
+3.3V
VDD is 3.3V by default
Question 19
Max DC Bus Voltage
380V
Question 23
DC Bus Sensing High Resistor 2000 kΩ
Question 24
DC Bus Sensing Low Resistor Refer to the control board user
manual
Question 54
NTC Temperature Shutdown
value
Refer to the control board user
manual
Question 63
GateSense Low-Side Devices High is true
Question 64
GateSense High-Side Devices High is true
Question 69
Motor 1 Current Input
Calculated in the corresponding
Section in control board user
manual
After all the MCEWizard questions are answered, the “Verify & Save Page” will be shown as in Figure 7.
Figure 7
Verify and Save page for MCEWizard
Click “Calculate” button and “Export to Designer File (.txt)” button to save the parameter file which will be used
by the MCEDesigner in the next steps.