Infineon Cypress S29GL01GS, Manual

Page: 70 / 109

Document Number: 001-98285 Rev. *R Page 69 of 108
S29GL01GS/S29GL512S
S29GL256S/S29GL128S
10. Electrical Specifications
10.1 Absolute Maximum Ratings
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may undershoot V
SS
to –2.0 V for periods of up to 20 ns. See
Figure 10.3 on page 71 . Maximum DC voltage on input or I/O pins is V
CC
+ 0.5 V. During voltage transitions, input or I/O pins may overshoot to V
CC
+ 2.0 V for periods
up to 20 ns. See Figure 10.4 on page 71
2. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
3. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational sections of this data sheet is not implied. Exposure of the device to absolute maximum
rating conditions for extended periods may affect device reliability.
10.2 Latchup Characteristics
This product complies with JEDEC standard JESD78C latchup testing requirements.
10.3 Thermal Resistance
10.4 Operating Ranges
10.4.1 Temperature Ranges
Table 10.1 Absolute Maximum Ratings
Storage Temperature Plastic Packages -65 °C to +150 °C
Ambient Temperature with Power Applied -65 °C to +125 °C
Voltage with Respect to Ground
All pins other than RESET#
(Note 1) -0.5 V to (V
IO
+ 0.5 V)
RESET# (Note 1) -0.5 V to (V
CC
+ 0.5 V)
Output Short Circuit Current (Note 2) 100 mA
V
CC
-0.5 V to +4.0 V
V
IO
-0.5 V to +4.0 V
Table 10.2 Thermal Resistance
Parameter Description LAA064 LAE064 TS056 Unit
Theta Ja Thermal resistance (junction to ambient) 25 27.3 46.2 °C/W
Parameter Symbol Device
Spec
Unit
Min Max
Ambient Temperature T
A
Industrial (I) –40 +85
°C
Industrial Plus (V) –40 +105
Automotive, AEC-Q100 Grade 3 (A) –40 +85
Automotive, AEC-Q100 Grade 2 (B) –40 +105