User Guide
21 of 25
002-34554 Rev. *A
2022-08-01
CY-SD4210 EZ-
USB™ SX3 HDMI 4K capture
kit guide
Troubleshooting
Figure 27
Device enumerated as BootLoader Device
6.2
Video streaming test
6.2.1
SX3 camera not displayed in
Device Manager
Verify that the PMODE switch (SW1) is in the SPI position.
Figure 28
Mode switch setting for SPI mode
6.2.2
Black screen detected in the Camera app
Check the debug logs:
a)
Open Tera Term.
b)
Connect to the COM port associated with the SX3 device.
c)
Check if any error messages are displayed.
Note:
If the above troubleshooting steps do not resolve the problem, visit the Infineon
page.
