Application Note
33 of 36
002-34970 Rev. **
2022-05-03
Foreign object detection tuning guide for wireless power transmitters
Applicable for WLC ICs
Appendix III
–
Enabling UART logs using Wireless Charging Configuration Utility
Appendix III – Enabling UART logs using Wireless Charging Configuration Utility
Note:
The UART logs are not enabled in the system. The user must disable the UART logs when not needed. The
standard system behavior is tested with UART logs disabled.
The UART logs can be enabled by enabling the following parameters in the transmitter “Profile” page in the
Wireless Charging Configuration Utility (see
).
•
UART enable
•
Critical enable
•
Message enable
•
Set Debug enable to Level 1
Figure 25
Profile page settings for enabling UART logs
Revert these changes to default on completion of the process. UART logs consume processor resource, and it is
recommended to disable UART logs for optimal performance of the WLC power transmitter.