Hardware Manual XE166 Easy Kit Board Version 3.1
General Information about XE166 Easy Kit Board
Hardware Manual
6
V1.2, 2009-08
2
General Information about XE166 Easy Kit Board
2.1
Summary of Features
– Infineon’s XE166 Controller in TQFP144/100/64 Pin Package
– High Speed CAN Transceivers, LIN Transceiver, USB to UART/JTAG bridge
– 8 Low Power Status LEDs
– Easy access to all pins
– 5-DIP switches for configuration
– On board USB to JTAG / UART interface
– Powered via USB
Connectors
– The XE166 Board offers a wide variety of connectors:
– USB connector for ASC/JTAG Interface
– 4 pin header for LIN Transceiver
– 16-pin header for JTAG interface (OCDS)
– 10pin (2x5) header for CAN High Speed Transceiver (CAN1/CAN2)
– 10pin header for DAP interface
Components
– Low-Drop Voltage Regulator TLE 4274
– Step Down Voltage Regulator TLE 6365G (optional)
– Four status LED´s for Power / RESET / JTAG
– 2 x CAN-Transceiver TLE 6251
– LIN Transceiver TLE 7259
– FT2232 Dual USB to UART/JTAG interface
– SPI EEPROM 128 Kbit AT25128N
– 8 general purpose LEDs
– Potentiometer for ADC
– Reset switch
Zero Ohm Bridges
– Zero Ohm resistors give the flexibility to configure the systems functionality
