Inficon 580-000, Original Operating Instructions

Page: 11 / 128

INFICON Safety | 2
IRwin-Operating-instructions-mina66en1-15-(1904) 11 / 128
2.3 Owner/supervisor responsibilities
The following notes are for organizations or any person responsible for the safe and
effective use of this equipment.
Safety conscious
operation
• Check that the leak detector is properly calibrated and not damaged before using
it.
• Make sure you operate the leak detector in accordance with this manual.
• Adhere to the following regulations:
– Intended use
– General applicable safety and accident prevention regulations
– International, national and local standards and guidelines
– Additional equipment-related provisions and regulations
• Use only original parts or parts approved by the manufacturer.
• Keep this instruction manual available on site.
Staff qualifications
• Only properly trained staff should be permitted to work with and on the equipment.
The training must cover the actual equipment model used.
• Make sure that users have read and understood the operating instructions and all
other applicable documents.
Non-authorized repairs
forbidden
The manufacturer (INFICON) denies all responsibility for the compliance of this
product with any of the type certificates for this product if any repairs or service
involving opening the instrument enclosure (yellow box) has been performed by
individuals or organizations not qualified therefore in writing by INFICON AB, Sweden.
The manufacturer (INFICON) denies all responsibility for the compliance of this
product with any of the type certificates for this product if the equipment is used in any
way not conforming to the instructions in this User Manual. Replacement of externally
accessible parts such as probes and filters is allowed with the exception of the Hand
Probe and the hose between Hand Probe and IRwin detector. These two parts are
certified anti-static and must not be replaced with non-original parts.