QUICK REFERENCE FOR DAILY OPERATION:
After your initial set up (see instructions below)
, follow these easy steps for optimal
performance of your
zooby
monitor:
In the car:
1.
Always use the safety buckle straps and velcro of the plush camera and adjust to fit
snugly on any headrest posts the plush camera is mounted on.
Note:
If the arms are
still loose after adjusting straps on the posts, you can wrap the plush arms around the
headrest posts at least once on each side and then use the buckle to tighten up your
fit.
2.
When you place your baby/toddler in the backseat, turn on the camera in the plush at
the bottom by opening the velcro enclosure and holding the power button until the
light turns green. Reattach the velcro.
3.
The mobile device will display the images from the camera. Adjust the camera in the
plush for the view you like by moving the bendi-neck inside the plush.
4.
When exiting the vehicle, turn off the camera in the plush when taking your baby out
of the vehicle.
This will ensure optimal battery life and performance.
5.
Remember to charge camera as needed. If your vehicle is equipped with cigarette
lighter or power outlets, you can charge your camera. Note: the camera in the plush
may be charged in the vehicle when your child is not in the car. When your unit is
fully charged, the "red" charging light will turn off.
3
FCC/IC label location :
