infaco TR9, Original User Manual

Page: 20 / 36

20
TR807C53E TR807C53E TR807C53E TR807C53E TR807G53 TR805P11
Cutting system servicing
Frequency of replacement of cutting system components for normal use.
A guide suffers the most wear in the place most often used for cutting. To have the most
consistent possible wear, it is recommended to turn the guide over often. To remove and
refit the chain guide, refer to the “
Replacing the chain or chain guide ” section.
Chain guide maintenance
TR805P11
TR807G53
Length 8"
Gauge 0.043"
Cleaning Deburring Lubrication Replacement Contact your dealer
Accumulation of dirt
Seepage
Wear
Guide sprocket
Grease
All other appearance defects or wear