infaco Powercoup PW2 SC160, Assembly Instructions Manual

Page: 20 / 28

TROUBLESHOOTING
Problem Cause Solution
Abnormal heavy vibrations
Improper mounting of the blade
Disassemble and reassemble the blade
following the procedure
Blade adjustment too important
Set the blade adjustment following the
procedure and contact your dealer if
necessary
Bad cuts
Blade wear
Change the worn blade following the
procedure.
Noise in the pole
Deteriorated pole guide Contact your dealer
Tool does not start
Battery drained Recharge the battery
No power to the tool Reconnect to power source
Others Contact your dealer
Tool suddenly stops
Too much pressure on the branches. Do not force on the tool
Battery drained Recharge the battery
Diameter of branches too large
Cut branches with a diameter smaller
20 21