47
16. To configure the device, click on login and enter the username and password. Default factory
Username:
admin
, Password:
admin.
17. Select Administration, than device Configuration. In the Device configuration select “Edit”.
18. Adjust port number for RS485 to match RS485 port as displayed in pc device manager.
19. Set Device Settings as shown in the above screen shot. C-Band and Ka-Band select BUC (Feedmount-
Integrated). Ku-Band up to and not including 20W BUCs set to (Feedmount-Integrated), 20W and
above select MBUC (Feedmount-Modular).
20. Click Add/Edit button.
21. Click on the Restart Driver button to initialize configured port. A message will be displayed after driver
restart.
22. Manoeuver back to main screen by closing the device configuration page.
