Inepro pospro, User Manual

Page: 26 / 96

20 - PosPRO
Setup
1. Click on to continue with the installation of the PosPRO on the computer.
2. Read the licence and if the terms have been accepted, tick "I accept the licence agreement" and
click on .
3. Browse to the path (or typ it in) of the location where the software should be installed, and click
on again.
4. Select the components that should be installed. A pre-selection can be chosen by clicking on the
combobox. Or make a selection by ticking or unticking the checkbox.
Installation Description
Full Installation
Installation of all components. Do not install all the components, not all
components will be needed!
DocuPRO (server)
Managing the print traffic. Do not install the DocuPRO server, this module is
not needed in this model type / configuration!
Inepro Client
The client pop-ups will be the graphical user interface will show the printjobs and the
Print Codes if available.
Do not install the client, this is not needed in this
model type / configuration!!
Terminal Sever
Provides the communication between the database and the terminals. Do not
install the Terminal Server, this is not needed in this model type /
configuration!!
Inepro Database
This option will install the system database on this machine. Install the database
if this is a stand-alone machine. If it is not a stand-alone machine do not
install the database here, but link the manager to the central database.
Click to continue.