15
Set up the copier
Turn on the copier. In this chapter you will set up the copier for use with the PayCon system. Examine the exact settings
below.
Konica Minolta Bizhub C350
·
Konica Minolta Bizhub C350
The PayCon Interface setting should be 'Minolta Serial'. (See chapter: 'Set up the PayCon' on
).
Activating the payment system:
1. Press <Utility>
2. Press <Meter count>
3. Press <stop> <0> <0> <stop> <0> <1> SERVICE MODE
4. Press <0> <0> <0> <0> <0> <0> <0> <0> <"Enter">
5. Press <stop> <9> - select <admin choice>
6. Press <Vendor "SET">
7. Select <Interface "Type 1">
-
Select <Message "Type 2"> (for cards only)
8. Leave the menu
19
Summary of Contents for 132300
