Inepro 132300, Installation Manual, Page: 12 / 29

10 - Konica Minolta Kit - Bizhub 132300
Hardware Setup
3. Close the tw o left flaps and fasten the m iddle one w ith it's screw . Then use the rip tie to attach the pow er cable and
connection cable to the right flap, thus creating a cable relief, and clip the rip tie using the w ire cutter.
4. Close and gently screw dow n the final flap
5. Place the PayCon bracket on the PayCon w ith the screw s from the bracket kit, (you don't need the three sm aller screw s).