Rev.:1
Page
11
of
15
eLAN-IR-003
In case you wish to set static IP address, please mark relevant line and fill in the details:
-
IP Address
– enter the new IP address of the eLAN-IR-003 (in dotted decimal format). In case
you set the static IP address, you have to find it by using the application (see detailed manual
for applications).
-
Subnet Mask
–
a code determining the size of the network, normally used for subnet mask is
the value 255.255.255.0.
-
Default gateway
– enter the default gateway according to the settings of your network (this is
usually the IP address of your router).
Note:
If you change the IP address, to log into the eLAN-RF-003 you must use the new IP address. If
the new IP address that you entered is not in the same subnetwork, the connection will not work if
settings are not changed in the connected device (PC, iMM Client) to the same subnetwork
The button
Update firmware
is used to update the firmware in your eLAN-IR-003.
You can download the latest FW version from the Website:
http://www.elkoep.cz/ke-stazeni/software/
If you are experiencing no difficulties with the eLAN-IR, it is not necessary to download the latest
firmware version.
Panel
Rooms
- create a room.
Button (
+
) - add a new room:
1.
ID
*of the room "optional data", if you do not enter it - a number is automatically generated.
Here you can only use the characters [0-9A-Za-z_-].
2.
Label
gives an arbitrary name to the room (you can use diacritical marks, gaps and others...)
3.
Type
– here you select the type of room or type of icon that you will then display after entering
the floorplan on the desktop.
4.
Floorplan
– here select the floorplan (image) that you added before in the tab
Floorplans
.
Button (
–
) - remove the selected room.
Button (
X
) - remove all created rooms.
Control of the device via Rooms
Rooms can be used to send IR codes (commands) directly from the web interface eLAN-IR-003.
By clicking on the required icon, open in the Configuration Panel the option IR codes assigned to
control functions of the given device.
By double-clicking on the required IR code, you will run the assigned function (a functioning IR
transmitter must be connected).
Flashing of STATUS LED of the given output confirms sending of the IR code.
