37
36
4
CHANGE SOUNDSETTINGS
Tool
Please use the included tool with metal loop to operate any of
the two switches:
>
Grip the tool with thumb and index finger and activate
the desired switch with help of the loop (up = on /down=
oft).
>
Based on a linear sound tuning (both switches turned
oft), you can chose from a total of four different sound
signatures.
Switch position:
Switch 1: off
Switch 2: off = studio reference tuning / linear sound signa-
ture
Switch 1: treble boost (+2dB)
Switch 2: bass boost (+3dB)
1
2
Switch 1 /
treble boost
Switch 2 /
bass boost
5
ACCESSORIES
Following accessories are available from the manufacturer:
•
cerumen filter set
•
drying caps
•
cleaning cloths
•
replacement cables in black or transparent color
Replacing the drying caps:
The drying caps remove residual moisture from the earpho-
nes. You can tell from the color of the orange pellets in the in-
side of the drying caps whether they are still absorptive. If the
pellets are colored orange, they can still pull moisture. When
the pellets turn beige, they are no longer absorptive.
>
Please replace the drying cap if it is no longer absorptive.
The suitable drying caps are available at your local InEar de-
aler. Instructions for using the drying caps are included with
the drying caps.
Cerumen-Filter-Set:
The Cerumen filter set shown below is used for replacing
cerumen filters.
Instructions for
replacing the
cerumen filters
are included in the
cerumen filter set.
EN
