Manual SIPP Node EN, Juni 2, 2015
5
When SIPP Node starts a discharge, data regarding start time and date is stored. It also stores
information about the identity of the SIPP and identity information for the station and pit. The entire
discharge process is then logged with minute resolution. SIPP Node takes measurements for ppm, flow
and level every second. A log position for ppm is calculated as a mean value for the past 60 samples
for ppm, which means that each point in the ppm-graph is the mean value for 1 minute. If SIPP
detects ppm over preset limit value and changes valve position, this moment is stored as a log
position. SIPP Node also calculates a number of key figures for the discharge such as amount of
discharged water, average ppm for the water that was discharge from the pit, maximum measured
ppm-value and more.
W
hen a discharge is ended, SIPP Node automatically connects to SIPP Warehouse and delivers the
generated log file. Also, if present, undelivered log files from previous discharges are delivered. If no
connection is available, the log file is stored internally until next time internet connection is available.
Summary of Contents for SIPP Node 400
Page 1: ... ...
