Manual SIPP Node EN, Juni 2, 2015
16
1.
A filter that works well. The water level in the filter after pumping is under the edge.
2.
To the left, a used filter that needs to be replaced, to the right a brand new filter.
3.
The filter is clogged and needs to be replaced immediately because water cannot be pushed out.
As it becomes this much water left in the filter, this water slowly drips down into the measuring
cell and the flow meter. If there will be water standing in these units when it gets below
freezing, there is an imminent risk that the units will freeze.
4.
The pumped water is dirty. The filter will most likely need replacement earlier than
recommended 50 m
3
.
Filter example 1
Filter example 2
Filter example 3
Filter example 4
Filter example 1
Summary of Contents for SIPP Node 400
Page 1: ... ...
