39
Start-up sequence
Information
Date and time
Tap iAssign tag
Radio firmware update
Instrument information
If the battery has been
reinstalled or replaced, the
instrument operator may be
prompted to set the date
and time, which can be
done manually or by
docking the instrument.
Tap the instrument to the
desired iAssign tag.
The instrument is installing
improvements.
—
Wireless information
Regulatory information
Instrument assignments
—
—
—
Indicates the company, person (user), and location (site) to
which the instrument is currently assigned.
Note:
When a ", X" displays next to the user name, it
indicates the access level for the instrument's current user,
which applies to Beacon-restricted areas.
Maintenance information
Gas information
—
The dock information (above left) indicates maintenance is
due in the future (“days until”).
The calibration information (above right) indicates when the
maintenance was last performed (“days since”). Calibration
information can also appear as due in the future.
A series of information screens provide the setpoints for
each sensor (H
2
S shown). The values from left to right are:
Top row: gas present alert, low alarm, and high alarm.
Bottom row: STEL alarm, TWA alarm, and calibration gas
concentration. Verify that the settings are appropriate.