Maintenance Procedures Review
SAFETY PROCEDURES
Adherence to safe working procedures are important to Service personnel at the time of servicing and to
those who may, at a later date be around the compressor and the system it serves. Routine maintenance
insures trouble free operation and protects your investment. All warranties are void if maintenance is ne-
glected.
DAILY
CHECK THE OIL LEVEL. Maintain the level at the center of the sight glass with 30w non-detergent.
DRAIN THE TANK. Turn off the power to the compressor and drain all the moisture from the bottom of the
tank.
WEEKLY
CLEAN THE OIL. If the oil appears contaminated by moisture or dirt, change immediately.
CHECK THE V BELTS. Turn off the compressor and inspect the belts for damage, excessive wear, and cor-
rect tension. Replace if necessary.
TEST THE SAFETY VALVE. Pull the ring on the safety valve. Air should escape and then reset. In the event
the compressor ran over pressure, the safety valve would reduce the tank pressure to a safe level. Never run
the unit without this safety valve or attempt to adjust it.
GENERAL INSPECTION. Check the overall operation of the unit. Tighten any loosen bolts, inspect for air
leaks and inspect for any unusual noises or vibrations.
EVERY 3 MONTHS OR 500 HRS OF OPERATION
CHANGE THE OIL. Refill with 30w non-detergent oil.
INSPECT COMPRESSOR VALVES AND VALVE PLATES. The compressor valves are manufactured from high
quality stainless steel for long life. Inspect and clean the valves and valve plates by brushing with a stiff
bristle brush. Do not use a steel or wire brush as severe damage to the sealing surfaces may result. Clean
safety solvent may also be used to loosen carbon deposits. NEVER use gasoline, thinners or other flam-
mable solutions to clean valves or related parts. Check to be sure the valves are seated against the sealing
surface around each port. If the valves are not sealing, compressor capacity will be severely reduced and
excessive heat will be generated, resulting in carbon build-up.
Industrial Gold Air Compressors
|
800-531-9656
| www.industrialgold.com
7.5, 10, 15 HP Electric Reciprocating Compressor
